Import STL files (3D) |
Drake Drakan | 14.3.2012 15:51 |
I tried to open a STEP file (converted with FreeCAD) but does not work!! There are alternatives to import an STL file?! thanks Drake |
Discussion Forum
Import STL files (3D)
To add questions or replies, please log in.
Filter:
Import STL files (3D) |
Drake Drakan | 9.3.2012 |
Good morning How can I import STL files (3D) with VariCAD? Thanks Drake |
Import STL files (3D) |
Bojan IVANCIC | 15.3.2012 09:17 |
What kind of file is STL file? The STEP file is marked as *.stp or *.step and it works fine in VariCAD since long time now. Bojan |
Import STL files (3D) |
Drake Drakan | 21.3.2012 00:20 |
con varicad esporto in file formato STL per la prototipazione veloce tramite stampanti 3D. Ho bisogno di file STL. io posso decidere di creare una parte meccanica e poi esportarla ma non posso aprire direttamente un file STL creato da altre persone per aggiungere modifiche . Forse io non so come fare Dal sito http://www.thingiverse.com, io scarico molti file STL e spesso ho la necessità di modificarli essi. Questi file posso tranquillamente aprirli con altri CAD come FreeCAD ma con Varicad non so farlo Io ho provato a cambiare estensione ai file (stp) ma non funziona! Se Varicad può importare solo file STEP mi chiedo se è possibile convertire i file STL a STEP. grazie Drake |
Import STL files (3D) |
Drake Drakan | 21.3.2012 00:21 |
with VariCAD export files in STL format for rapid prototyping with 3D printers. I need to STL file. I can decide to create a mechanical part and then export it but I can not directly open a STL files created by other people to add changes. Maybe I do not know how to do From http://www.thingiverse.com site, I download lots of files STL and I often need to edit them. I can easily open these files with other CAD systems such as FreeCAD VariCAD but do not know I tried changing the file extension (stp) but does not work! If VariCAD can only import files STEP I wonder if you can convert STL to STEP. thanks Drake |
Import STL files (3D) |
Bojan IVANCIC | 21.3.2012 08:37 |
Unfortunately, VariCAD cannot import STL (3D) files. Import of 3D files is limited to STEP format only. You can, however, export (save as) 3D structure into STL, STEP or IGES. Regards, Bojan |
1