Rolled Profiles |
VariCAD Support | 9.6.2008 11:19 |
The feature you described is available just for pipelines and wires. As to the rolled profiles, you can either define their length in the dialog window (Parts) or when being in this dialog box simply define the length by the mouse (first and end points)... The second option is available in the new 2008 2.0 version, which is about to be released. |
Discussion Forum
3D Rolled profiles
To add questions or replies, please log in.
Filter:
3D Rolled profiles |
Pepi Anchoa | 1.6.2008 |
Is it possible to create/place rolled profiles like creating pipes and wires - directly from point to point? |
Rolled Profiles |
Pepi Anchoa | 9.6.2008 14:56 |
> "...or when being in this dialog box simply define the length by the mouse (first and end points)... The second option is available in the new 2008 2.0 version, which is about to be released. " Then will that rolled profile be placed between that FIRST and END points in the new 2008 2.0 version? |
Rolled Profiles |
VariCAD Support | 10.6.2008 17:14 |
What I have described allows you just to measure the distance which is automatically entered into the field "length" in the dialog box. Such a defined rolled profile can be then inserted into 3D space and put in a required place the same way as other 3D solids. |
1