coresponding holes for screws |
VariCAD Support | 13.6.2008 17:40 |
If you have a screw and want to create a corresponding hole for it, please do the following: 1. Click the "Cut, Keep Cutting Tool" icon (CUTS command). 2. And following the instructions in the status bar, select the screw as a cutting tool, and then select a solid to be cut. 3. As the system remembers that the screw is a standard part, it offers you creating a hole according to the corresponding standards. |
Discussion Forum
coresponding holes for screws
To add questions or replies, please log in.
Filter:
coresponding holes for screws |
Olaf Damm | 13.6.2008 |
Hallo, The manual mentions that if you want to create holes for screws from the libraries, you can use the screws as tools to create their corresponding holes. How to do it? Thanks Olaf |
1